Official Raspberry Pi Case
This is the official Raspberry Pi Case! This beautifully designed case for Raspberry Pi has a modular design. The side pieces can be removed to give access to the connectors of the Raspberry Pi. The top of the case can also be removed to allow the use of extension boards.
Official Raspberry Pi Zero Case
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it).
NES Classic Case for Raspberry Pi 3, 2 and B+
Get your NES Classic Case, a Buffalo Game Pad, load up your Raspberry Pi 3, 2 or B+ with Retropi, and get into the awesome world of retro gaming! This NES Classic Case for the Raspberry Pi was designed by Old Skool Tools and is made out of injection molded ABS plastic. It has an awesome retro NES design and is perfectly suited to house your Raspberry Pi and turn it into a retro game console!
Pimoroni – Pibow Case
The guys from Pimoroni have redesigned Pibow to be compatible with both the Raspberry Pi 3, 2 and B+. Due to changes in the layout of the Raspberry Pi 3 older Pibows (one’s with a 2/B+ label) will not work ideally with Raspberry Pi 3!
Pimoroni – Pibow Coupé Case
The Pibow Coupé is very similar to the original Pibow case with the exception that the top of the case is lower. This will give easier access to the extension header and the camera connector.
JustBoom – Cases for Amp/DAC/Digi boards
Looking for a sleek and durable case for your Raspberry Pi and JustBoom HAT or pHAT board?
The cases consist of two parts which can be assembled quite easily without any tools. It allows access to all the ports of the Raspberry Pi and the JustBoom board.